Use this article to turn on a Bullhorn unit's Bluetooth, connect to it with the Bullhorn FieldPro app, and send a test message to Bullhorn Web.
Applies to: Bullhorn remote monitoring units with Bluetooth, using the Bullhorn FieldPro app.
Connect to the unit
- Install the latest version of Bullhorn FieldPro from the Apple App Store or Google Play Store, and turn on Bluetooth on your phone or tablet before you open the app. Have a magnet with you.
- Swipe a magnet across the access point on the unit. It is marked with the Bluetooth and magnet symbols. A blue light flashes to show the unit is waiting to pair.
- On your device, open Bullhorn FieldPro and tap Scan For Devices.
- Tap the name of the unit you want, then tap OK in the confirmation box.
- If the unit's firmware is not current, the app asks you to update the firmware.
Send a test message
- In the Options menu, tap Test Message.
- Tap Send Test Message. The unit sends a test message to your Bullhorn Web account. Any commands queued for the unit in Bullhorn Web are then sent to the unit and applied.
What else you can do over Bluetooth
- Save settings to a template and apply it to similar units.
- View battery voltage and power status.
- Update firmware when an update is available.
- Review unit information or email AI Support from the unit's Info page.
If the unit does not show up in the scan, see the article "Bullhorn FieldPro: Troubleshooting". For more help, submit a technical support ticket at https://www.aiworldwide.com/contact-support/.